• Remote Control - All functions are managed from an easy to use remote control which can be hand held or mounted on the wall.
• Twin Nozzle - The Rear & Feminine wash nozzles (RF) are separated to enhance hygiene.
• Heated Water - Cleanses with warm water and offers 3 temperature settings.
• Self-cleansing Nozzle - Automatic spray washes the nozzle for 5 seconds before and after every use.
• Heated Seat - When sitting on the seat it will warm up to the desired temperature. (very handy for cold mornings)
• Soft Close Lid - Allows the lid and seat to close down gently.
• Auto Power Saving Mode - The unit turns to power saving mode automatically when it is not used for 30 min.
• Seat Sensor Locking Mode – The bidet will only function if you are seated. However, the Seat Sensor can be turned off so all functions will operate regardless if you sit down or not. This is used for child seats or elderly people who may not activate the sensor.
• Nano Sliver Ceramic Water Filter - Can be equipped with a water filtration MF filter which purifies the water and kills 98% of the bacteria in the water due to nano silver particles.
• Quick Release - For easy removal of the unit for cleaning.
• Electrical Certifications - Certified product compliant with Australian Standards Watermark and Electrical certifications.

• Bidet it is easy to install on most toilet pans, please use the plumbing installation guide for more information
• Bidet will replace your current toilet seat.
• All the parts required for standard installation of the bidet come supplied with the unit.

• Power point within 1.6m from the toilet
• Access to a water supply in any of the following places:
• 1. Behind the toilet (most probably the tap which feeds the toilet cistern)
  2. Access inside the toilet cistern (relative to most closed coupled toilet)
  3. Internal cistern (inside the wall)
  4. Separate water tap nearby

• Bidet unit
• Wireless remote
• Water filter
• Manual
• Standard installation kit:
  • T-piece connector
  • Braided hose ( to link the water tap to the cistern)
    • NOTE: if there is no access to the water tank from under the toilet and main pipe connects inside the tank then internal install kit required – available for purchase on our site.
  • Standard installation bolts if there is access to the toilet lid bolts from under the toilet.
    • NOTE: if there is no access to the toilet lid bolts from under toilet then top fixing bolts required – available for purchase on our site.
  • Dual check valve for extra back-flow prevention.
  • Water supply white tube for connecting the bidet to the t-piece water supply.

Bidet Info:

Some of the Standard features you will find in the N-1000 are:

• rear wash and feminine wash
• dryer which will significantly reduce the amount of toilet paper required
• heated seat for those cold winter mornings
• air bubble infusion into the water stream to achieve better cleaning and conserve water consumption
• energy efficient will learn the weekly usage patterns to save energy

Extra features for N-1000 comes with are:

• you can adjust the nozzle position to the spot where it suits you best no need to adjust yourself to reach the nozzle
• child option, if selected the bidet will reduce the water pressure and nozzle position by half in order to adjust for a much gentler wash suitable for a child.
• the bidet runs a self-cleaning procedure before and after every use of the nozzle to maintain a higher hygiene standard.
• water pulse and massage option for an enhanced bidet experience
• quick release to detach the main body of the bidet in order to clean properly under and around it.

How to check if the N-1000 fits my toilet?

Box Content:

• bidet unit
• water filter
• manual
• standard installation kit:
  • t-piece connector
  • standard installation bolts if there is access to the toilet lid bolts from under the toilet
    • NOTE: if there is no access to the toilet lid bolts from under toilet then “top fixing bolts” required – included in the box
  • dual check valve for extra back-flow prevention
  • water supply white tube for connecting the bidet to the t-piece water supply

Product Certification

Features

	Bubble Wash Aerated water wash aids cleansing		Massage The nozzle moves back and forth for a massage effect
	Child Settings Adjust nozzle position and water pressure for children		Detachable Main Body It is easy to install and detach for cleaning or moving
	Pulse Pulse wash repeatedly cycles from weak to strong		Adjustable Nozzle Position Users can adjust nozzle position to the desired setting
	Self-Diagnosis Self-diagnosis function continuously monitors the operation		Dry After using the bidet, the user has the option to dry the washed area
	Learning Energy Save Energy-saving computer function learns through weekly use patterns to save energy		Seat Sensor User must be sitting to activate controls
	Self-Cleaning To wash and maintain clean nozzle that operates before and after every use		Side Control All operating functions are controlled from an attached remote control

3 Points

Power Wash Soft but powerful water wash for added cleansing benefit

Compact Design Fits most 1 and 2 piece toilets. Sleek-low profile- contoured design

Instant Heating (Hydraulic Type) Enjoy efficient and continuous warm water with energy-saving

Function Matrix

Functions/Model	N-800	N-1000
Posterior & Feminine	Air-Bubble & instant heating system
Move & Massage
Self-Cleaning
Purifying Filter
Seat Sensor
Heated Seat
Temperature control
Self-Diagnosis
Soft- Lid
Self-Diagnosis
Learning Power Save
Dryer
Deodorization
Remote control

Specifications

• Side Control - All functions are managed from an easy to use side control (R).
• Stainless Steel Nozzle - The Rear, Feminine, Enema and Child wash nozzle (RFEC) is stainless steel for enhanced hygiene.
• Heated Water - Cleanses with warm water and offers 3 temperature settings.
• Nozzle Position Adjustment - The nozzle position moves back or forward to set the exact location to cleanse.
• Self-cleansing Nozzle - Automatic spray washes the nozzle for 5 seconds before and after every use.
• Massage & Pulse - Moves the nozzle forward and backward or Pulses water for a more thorough cleansing.
• Heated Seat - When sitting on the seat it will warm up to the desired temperature. (very handy for cold mornings)
• Air Dryer - Blows warm air to gently dry you after a wash and offers 3 temperature settings.
• Deodoriser - Sucks foul air from the toilet bowl through a carbon filter reducing odours - carbon filter lasts up to 7 years.
• Soft Close Lid - Allows the lid and seat to close down gently.
• Auto Power Saving Mode - The unit turns to power saving mode automatically when it is not used for 30 min.
• Seat Sensor Locking Mode – The bidet will only function if you are seated. However, the Seat Sensor can be turned off so all functions will operate regardless if you sit down or not. This is used for child seats or elderly people who may not activate the sensor.
• Nano Sliver Ceramic Water Filter - Can be equipped with a water filtration MF filter which purifies the water and kills 98% of the bacteria in the water due to nano silver particles.
• Quick Release - For easy removal of the unit for cleaning.
• Electrical Certifications - Certified product compliant with Australian Standards Watermark and Electrical certifications.

• Bidet it is easy to install on almost any toilet pan, please use the plumbing installation guide for more information
• Bidet will replace your current toilet seat.
• All the parts required for standard installation of the bidet come supplied with the unit.

• Power point within 1.8m from the toilet
• Access to a water supply in any of the following places:
• 1. Behind the toilet (most probably the tap which feeds the toilet cistern)
  2. Access inside the toilet cistern (relative to most closed coupled toilet)
  3. Internal cistern (inside the wall)
  4. Separate water tap nearby

• Bidet unit
• Water filter
• Manual
• Standard installation kit:
  • T-piece connector
  • Braided hose ( to link the water tap to the cistern)
    • NOTE: if there is no access to the water tank from under the toilet and main pipe connects inside the tank then internal install kit required – available for purchase on our site.
  • Standard installation TOP FIXING and BOTTOM FIXING bolts are included, use whichever is needed depending on the toilet type.
  • Dual check valve for extra back-flow prevention.
  • Water supply white tube for connecting the bidet to the t-piece water supply.

• Remote Control - Extra large, anti-shock, water resistant, LCD display and braille buttons. All functions are managed from an easy to use, an intuitive remote control which can be hand-held or mounted on the wall or either side of the bidet.
• One Button Auto Cleanse - Exclusive! Full wash and dry cycle by pressing one button.
• Twin Nozzle - The Rear/Enema & Feminine wash nozzles (RFE) are separated to enhance hygiene.
• Heated Water - Cleanses with warm water and offers 3 temperature settings.
• Nozzle Stream Adjustment - 3 levels available for the latest water spray technology (intensive cleansing of a focused area or soft cleansing of a broader area by adjusting the water stream width)
• Nozzle Position Adjustment - The nozzle position moves back or forward to set the exact location to cleanse.
• Self-cleansing Nozzle - Automatic spray washes the nozzle for 5 seconds before and after every use.
• Move/Massage - Moves the nozzle forward and backward for a more thorough cleansing.
• Heated Seat - When sitting on the seat it will warm up to the desired temperature. (very handy for cold mornings)
• Air Dryer - Blows warm air to gently dry you after a wash and offers 3 temperature settings.
• Soft Close Lid - Allows the lid and seat to close down gently.
• Auto Power Saving Mode - The unit turns to power saving mode automatically when it is not used for 30 min.
• Seat Sensor Locking Mode – The bidet will only function if you are seated. However, the Seat Sensor can be turned off so all functions will operate regardless if you sit down or not. This is used for child seats or elderly people who may not activate the sensor.
• Nano Silver Ceramic Water Filter - Equipped with a water filtration MF filter which purifies the water and kills 98% of the bacteria in the water due to nanosilver particles.
• Electrical Certifications - Certified product compliant with Australian Standards Watermark and Electrical certifications.

• Easy to install on toilet pan, please use the plumbing installation guide for more information
• Will replace your current toilet seat.
• All the parts required for standard installation of the bidet come supplied with the unit.

• Power-point within 1.6m from the toilet
• Access to a water supply in any of the following places:

1. Behind the toilet (most probably the tap which feeds the toilet cistern)
2. Access inside the toilet cistern (relative to most closed coupled toilet)
3. Internal cistern (inside the wall)
4. Separate water tap nearby

• Access to the toilet lid bolts from under the toilet

• Bidet unit
• Wireless remote
• Water filter
• Manual
• Standard installation kit:
  • T-piece connector
  • Braided hose ( to link the water tap to the cistern)
    • NOTE: If there is no access to the water tank from under the toilet and the main pipe connects inside the tank then Internal install kit required – available for purchase on our site
  • Standard installation bolts (access to the toilet lid bolts from under the toilet is needed)
  • Dual check valve for extra back-flow prevention
  • Water supply white tube for connecting the bidet to the t-piece water supply
  • 2 Fixing rubbers
  • 2 Fixing washers
  • 2 Fixing nuts
  • 2 Fixing sliders
  • Filter clip
  • Filter fixing stopper
  • 3 Screws
  • 3 Anchors
  • Fixer hand grip
  • 2 Batteries (AA size)

• Remote Control - All functions are managed from an easy to use, stylish and intuitive remote control which can be hand held or mounted on the wall.
• Twin Nozzle - The Rear/Enema & Feminine wash stainless steel nozzles (RFE) are separated to enhance hygiene.
• Heated Water - Cleanses with warm water and offers 3 temperature settings.
• Nozzle Position Adjustment - The nozzle position moves back or forward to set the exact location to cleanse.
• Self-cleansing Nozzle - Automatic spray washes the nozzle for 5 seconds before and after every use.
• Move/Massage - Moves the nozzle forward and backward for a more thorough cleansing.
• Heated Seat - When sitting on the seat it will warm up to the desired temperature. (very handy for cold mornings)
• Air Dryer - Blows warm air to gently dry you after a wash and offers 3 temperature settings.
• Soft Close Lid - Allows the lid and seat to close down gently.
• Auto Power Saving Mode - The unit turns to power saving mode automatically when it is not used for 30 min.
• Seat Sensor Locking Mode – The bidet will only function if you are seated. However, the Seat Sensor can be turned off so all functions will operate regardless if you sit down or not. This is used for child seats or elderly people who may not activate the sensor.
• Nano Sliver Ceramic Water Filter - Equipped with a water filtration MF filter which purifies the water and kills 98% of the bacteria in the water due to nano silver particles.
• Quick Release - For easy removal of the unit for cleaning.
• Electrical Certifications - Certified product compliant with Australian Standards Watermark and Electrical certifications.

• Bidet it is easy to install on almost any toilet pan, please use the plumbing installation guide for more information
• Bidet will replace your current toilet seat.
• All the parts required for standard installation of the bidet come supplied with the unit.

• Power point within 1.6m from the toilet
• Access to a water supply in any of the following places:
• 1. Behind the toilet (most probably the tap which feeds the toilet cistern)
  2. Access inside the toilet cistern (relative to most closed coupled toilet)
  3. Internal cistern (inside the wall)
  4. Separate water tap nearby

• Bidet unit
• Wireless remote
• Water filter
• Manual
• Standard installation kit:
  • T-piece connector
  • Braided hose ( to link the water tap to the cistern)
    • NOTE: if there is no access to the water tank from under the toilet and main pipe connects inside the tank then internal install kit required – available for purchase on our site.
  • Standard installation bolts if there is access to the toilet lid bolts from under the toilet.
    • NOTE: if there is no access to the toilet lid bolts from under toilet then top fixing bolts required – available for purchase on our site.
  • Dual check valve for extra back-flow prevention.
  • Water supply white tube for connecting the bidet to the t-piece water supply.

• Side Control - All functions are managed from an easy to use side control (R).
• Stainless Steel Nozzle - The Rear, Feminine, Enema and Child wash nozzle (RFEC) is stainless steel for enhanced hygiene.
• Heated Water - Cleanses with warm water and offers 3 temperature settings.
• Nozzle Position Adjustment - The nozzle position moves back or forward to set the exact location to cleanse.
• Self-cleansing Nozzle - Automatic spray washes the nozzle for 5 seconds before and after every use.
• Massage & Pulse - Moves the nozzle forward and backward or Pulses water for a more thorough cleansing.
• Heated Seat - When sitting on the seat it will warm up to the desired temperature. (very handy for cold mornings)
• Soft Close Lid - Allows the lid and seat to close down gently.
• Auto Power Saving Mode - The unit turns to power saving mode automatically when it is not used for 30 min.
• Seat Sensor Locking Mode – The bidet will only function if you are seated. However, the Seat Sensor can be turned off so all functions will operate regardless if you sit down or not. This is used for child seats or elderly people who may not activate the sensor.
• Nano Sliver Ceramic Water Filter - Can be equipped with a water filtration MF filter which purifies the water and kills 98% of the bacteria in the water due to nano silver particles.
• Quick Release - For easy removal of the unit for cleaning.
• Electrical Certifications - Certified product compliant with Australian Standards Watermark and Electrical certifications.

• Bidet it is easy to install on almost any toilet pan, please use the plumbing installation guide for more information
• Bidet will replace your current toilet seat.
• All the parts required for standard installation of the bidet come supplied with the unit.

• Power point within 1.8m from the toilet
• Access to a water supply in any of the following places:
• 1. Behind the toilet (most probably the tap which feeds the toilet cistern)
  2. Access inside the toilet cistern (relative to most closed coupled toilet)
  3. Internal cistern (inside the wall)
  4. Separate water tap nearby

• Bidet unit
• Water filter
• Manual
• Standard installation kit:
  • T-piece connector
  • Braided hose ( to link the water tap to the cistern)
    • NOTE: if there is no access to the water tank from under the toilet and main pipe connects inside the tank then internal install kit required – available for purchase on our site.
  • Standard installation TOP FIXING and BOTTOM FIXING bolts are included, use whichever is needed depending on the toilet type.
  • Dual check valve for extra back-flow prevention.
  • Water supply white tube for connecting the bidet to the t-piece water supply.